The AGTC clip fix tool is a pneumatic mounting device for clips of various designs. When pressing the clip fix tool with the mounted clip adapter and clip against the intended mounting position (hole or bolt), a mounting pulse is triggered in the clip fix tool. The clip is set by the mounting pulse. The level of the set operating pressure determines the strength of the mounting pulse. A specific clip adapter is required for mounting different clips.
By pressing the clip fix tool against the clip, the mounting pulse of the device is triggered and the clip is mounted. When the clip is pressed, the drive unit is pushed approx. 7 mm into the housing and the valve is actuated. The valve ventilates the drive unit, the piston accelerates and hits the front cylinder end cap. The resulting pulse pushes the clip into the recess provided in the car body.