Pump control

Pump automation systems

Pumping stations are essential for water treatment – unfortunately, you’re probably thinking. Because these systems send massive quantities of water through the different treatment and purification stages, they are often prone to faults and almost always consume a lot of energy. Festo has developed a safe and energy-efficient automation solution for these “problem children” – one that has proven itself around the world, hundreds of times. We’ve identified the main issue: check valves. Which you won’t need if you’re working with Festo.

No water treatment without pumps

In a wastewater treatment plant, the relentlessly running pumps shift huge quantities of water. This calls for massive machines and the energy consumption is correspondingly high. It’s no surprise then that the energy consumption of wastewater treatment plants accounts for up to 20% of municipal electricity costs. A large part of that goes on the pressurization account; the pumping stations are the second-largest cost driver. This is particularly the case where obsolete technology is in use, especially when several pumps are running at the same time, and when for reasons of redundancy, you have to have further pumps on standby.

It is clear that energy-efficient processes are called for and are being increasingly promoted. At Festo, we know that there is a potential for saving energy with most systems. Let’s look at a conventional pumping station first. Or you can skip directly to the Festo solution .

Check valves conceal follow-on costs

Even today, the pumping stations in many wastewater and water treatment plants are still being secured in the conventional way using mechanical check valves. Fundamentally, check valves are meant to prevent the backflow of the water should the pump come to a standstill. But the solution that uses mechanical check valves has a number of disadvantages. Most of all, it is prone to faults and it is inefficient.

Risks, wear, and damage

The main problem is that, because of the valve disc, a check valve creates a resistance against the performance of the pump, which it must overcome. This requires more energy than is necessary. Even worse, it impacts operational safety, because when the pump comes to a standstill, a gas bubble created by microorganisms is formed that prevents an automatic start-up of the pump. The check valve first has to be actuated manually so that the gas can escape from the bubble and the pump can start up.

Viewed in the long term, there is also the fact that closing check valves can generate a water hammer, which can cause the piping system to start to oscillate. Damage to the piping is certain to follow. And there is a further factor that shortens the service life of the whole system: check valves are prone to leaks. The result of that are leakages and return flows that are difficult to identify. Once the damage has become visible, it is often not just a question of replacing the check valve; in the worst case, even the pump has to be replaced.

Pneumatic solution with knife gate valves

Festo offers a safe and energy-efficient solution for pumping stations that replaces mechanical check valves: automated gate valves with pneumatic linear actuators. The process valves are connected via a centralized or decentralized PLC.

Energy-efficient operation of pumps

An important argument for the pneumatic, automated knife gate valve is that the pump no longer has to work against the flow resistance generated by the flap. The energy savings that result for the operation of the pump are far higher than the energy requirements for the additional controller and the creation of the compressed air.

Long-term stable system

The NAMUR valves, which are mounted directly on the linear actuator and controlled through a centralized or decentralized PLC, ensure that the knife gate valves open and close at the same time as the pump. If unwelcome cavitation occurs, the gas escapes from the bubble immediately after the gate valve is opened, meaning that the functioning of the pump is not impacted. And, as a result of the controlled closing function, water hammer is no longer created on the piping system. Furthermore, there is reduced wear on the automated knife gate valve and improved sealing, which significantly lengthen the service life of the system.

More operational safety

Even in the case of power failures, your system remains reliable and goes to a fail-safe position; if there is a voltage drop, an air reservoir springs into action automatically for the compressor. Pneumatic actuators have three emergency functions: open, close, stop. The situation-appropriate functioning of the process valves is guaranteed at all times.

Advantages of the pneumatic solution

Automated gate valves with pneumatic linear actuators from Festo offer a number of tangible advantages:

  • Cost savings: Wastewater treatment plant operators achieve the same pump output with considerably less energy input.
  • Plant safety: Since the knife gate valves close tightly, undetected leakage no longer occurs during operation.
  • Plant and system availability: Pneumatically actuated industrial valves stand out thanks to their ease of use and minimal susceptibility to failure. They also easily survive high breakaway torques caused by deposits and distortions by increasing the air pressure.
  • Reliability: The automated emergency function maintains the compressed air supply even in the event of a voltage drop.
  • Stability: Pneumatic actuators stand out for their continuous load resistance, long service life, and overload protection when opening and closing the knife gate valves.
  • Working conditions: Noise levels are reduced significantly.

Example: Sindelfingen wastewater treatment plant

To date, Festo has successfully implemented the described solution in over 100 water treatment and more than 200 wastewater treatment plants. For example, at the Sindelfingen wastewater treatment plant. The system cleans the wastewater generated by roughly 250,000 residents in southern Germany. In the pumping station that brings the wastewater from the primary settlement tank for biological treatment, there are six centrifugal pumps, each with a power consumption of 90 kW and a flow rate of up to 500 l/s at a delivery head of 8 to 9 m. Depending on the quantity of wastewater, up to five of the six pumps are in operation at any one time. One pump is there for redundancy purposes.

Before the conversion, the check valve was held permanently open, which, however, reduced the flow rate by up to 10%. In addition, the free flow cross section was reduced, and the piping system suffered from water hammer when the check valve closed.

Since we replaced the check valves completely and functionally with the pneumatic automation of the existing knife gate valves, the same pump flow rate has been achieved with significantly less energy. As a result, the Sindelfingen wastewater treatment plant saves annually almost 90,000 kWh. This corresponds to 2% of the wastewater treatment plant’s total energy requirements and represents an annual saving of over 11,000 euros. The authority invested 25,000 euros. Do the math and see just how quickly Festo automation will have paid for itself.

汤姆叔叔-在线视频