STEM-MecLab-d0415a_00198ap-EN

MecLab? Mechatronics Training System

The purpose of MecLab? is to provide students an opportunity to learn the practical and theoretical aspects of automation technology. It consists of three separate systems that can be used in combination or as stand-alone stations, sparking student interest in scientific thinking.

STEM-MecLab-d0415a_00058ap

MecLab? helps students gain insight into one of the most significant fields of application for automation technology – production technology. The three stations of the mechatronics training system – conveyor, handling, and stacking magazine – are simplified models of typical processes to be found in any automated production plant. Students solve real-world industrial motion control problems. They observe and measure electrical and fluid power laws as they design systems to move, assemble, and sort work pieces within the stations. They gain the ability to design and evaluate production processes and procedures, based on the efficiency of motion and energy conservation.

MecLab-Stacking-d0010c

Stack Magazine Station

The stacking station stores workpieces that can be stamped with the stamping unit. In an automated production line, work pieces are stored and fed into the process in a timed sequence. This is the function of the MecLab Stack Magazine Station. It stores, transfers, and presses each work piece.

MecLab-conveyor-d0011c

Conveyor Station

In many production assembly lines, work pieces are transported between “process stations” via conveyor belts.

The conveyor station in MecLab provides realistic simulation of an industrial workpiece transport system. The drive motor can be made to run forward and in reverse. Work pieces are detected, classified, and sorted by color.

MecLab-Handling-d0012c

Handling Station

Whether it’s a simple pick & place operation or highly complex assembly work – handling systems are always involved. The MecLab? Handling station consists of pneumatic cylinders with simple bearing guides and two axes. The work piece is held by a pneumatic gripper. The system can be used to transport the work piece between stations or to join two halves of a work piece.

汤姆叔叔-在线视频